I am Guido from SPS Motorsport and I would like to introduce you to our program.
We are the largest MX-5 tuner in Germany. We do not only convert vehicles for the road but also do a lot of racing. Racing cars with partly over 500hp have already left our workshop and reached podium places in various races.
We had a successful weekend on Zandvoort. 5 of our 6 cars with their drivers got on the podium. The cars worked really well and we had no big issues. The drivers are also very happy with their cars and the work of our whole team. We are looking forward to the upcoming German TimeAttack season.
That NA looks so great, i've been following build at instagram for a while. Do you guys sell those NoPro(?) -kits? I would almost sell my kidney for kit like that ::)
Here you can see a bit of everyday workshop life. This ND got a BBR GTi turbo kit. The car now makes 240hp. It also got 949 racing rims with semi-slicks, a big-brake-upgrade, an Öhlins suspension and an anti-rollbar from H&R. The car drives really well.
One customer brought us his car to get a suspension adjustment with his new rims, tires and our coilover. We like this setup. The car has a sporty look.
Setup: Enkei RPF1 8x16 with 38mm offset on Yokohama Advan AD08R 225/45 R16 and our SPS coilover for the ND
This a good example for a really tough build! We made the car ready for Time Attack races, but the car is still allowed to drive on street.
Some specs: 1.6L forged Block with an EFR 6258 turbocharger (over 300hp) full 3" exhaust with HJS catalytic converter Competition Clutch Stage 3 Clutch Megasquirt MS2 pnp 6-speed manual gearbox Kaaz LSD Engine-, gearbox- and differential cooling BC Racing ER-series suspension K-Sport 6-piston 286mm big brake upgrade Nankang AR-1 205/50 R15 Sparco Sprint seats with Sparco 4-point harness Full roll over protection system Nardi steering wheel
It has a Rotrex C30/94 supercharger on a 2.0l making 345hp and 360Nm of torque. The car drives really nice because it feels like a big natural aspirated engine. High speed runs on the German Autobahn are no problem. ;)
The rest of the setup: - Flyin Miata Header - HJS 200 cells catalytic converter - SPS Motorsport Catback - Cat Cams Stage 1 camshafts - forged pistons (compression 13:1) - forged rods - 750ccm injectors - BC Racing BR-series coilover - OZ Ultraleggera 8x17 with 40mmm offset on Yokohama AD08R 215/45 R17 tires - K-Sport 8 piston calipers
Here we have a really track focused NC. A 2.0L with a GT2860RS turbocharger making 270hp. The car is also very light. With 50% gas in the tank it weighs just 1122kg.
The rest of the specs:
- CSF radiator - coilover suspension - short differential - brake cooling hoses - Tarox F2000 with EBC YellowStuff - rollover protection bar - oilfilter relocation - gearbox- and differential oil cooling system with external oilpump - Rota Titan 9x17 with Nankang AR-1 255/40 ZR17
One of my favorite cars on our site. Very clean oldschool setup.
The specs: - 1.6L with a GT2560 turbocharger producing 230hp - Mishimoto radiator - oilcooling system - BC Racing BR-series coilover suspension - Lotus seats - Sparco seat belts - Momo steering wheel - SPS Track+ roll over bar - Rota RKR 8x15 with Nankang AR-1 205/50 R15 tires
Last weekend we had another TimeAttack run. The cars performed really well. We also had a special car there to test. ;) A Ferrari F40 LM. We maintain the car since last year.
Last weekend we had another TimeAtttack run, this time at the "Reisbrennen".
We had some issues with the white NA and the green NB: The white NA got another Turbo, a Borg Warner EFR 7670. At 1.5bar the fuel pressure got to low so we have to upgrade the fuelpump. The green NB got problems with the ignition. We have to change the sparkplugs to a higher heat value.
But the rest of our cars performed pretty well and we saw many other MX-5 on the track. We are happy to MX-5s on the racetrack.
We had a customer here for a budget turbo conversion with a TD04 turbocharger on a 1.6L engine producing 220hp. Cool and clean looking car with some nice parts installed.
This year the world is celebrating 30 years of Mazda MX-5. So Mazda Germany had the idea to pay tribute by braking a record. The idea was to drive as many corners as possible in 12 hours. The perfect job for a MX-5 NA.
So Mazda Germany came to us to get a red NA 1.6L prepared for the record. The limit was the power of the engine had to be stock.
So we installed these parts: - engine oil cooling kit - 6 speed transmission with gearbox oil cooling kit - miataroadster short shifter - Torsen-LSD with differential oil cooling kit - SPS roll bar - Sparco steering wheel - Sparco Sprint seats - Schroth racing 4-point harness - StopTech 4-piston 286mm Big Brake Kit - BC Racing ER-series suspension - ATS DTC 15" rims - Mishimoto radiator - Competition Clutch Flywheel and Stage 3 Clutch - custom exhaust - custom rallye headlights
Then they set the record in the austrian alps. Mazda Germany also produced a YouTube series about that record. We are very proud to be part of that whole operation.
This is the car of a good friend of our company. The look of the car is really cool, but the engine is a tough one.
A BP block, reamed to 2 liters with an individual throttle body, race header, adjustable camshaft gears, race camshafts, revving to 8600rpm producing 230hp. The sound the engine produces, is incredible! It screams like a race car! I think the owner, Jean Claudio Flensberg, has a good taste. ;)
This is one of the toughest conversions we ever made. A 2.5L V6 KL swap with an ITB. We had many issues with the car until it was ready to go on the street. But at the end we solved every problem and now the car runs fine. The block is bored from 2.5L to 2.6L equipped with Wiseco pistons and K1 conrods, main and conrod bearings are Toga high performance bearings. The head got solid cam followers with different camshaft and an individual throttle body. The engine produces 250hp with an airbox on the ITB and 300hp without the airbox.
Specs: - 2.6L KL - Wiseco pistons - K1 conrods - Toga high performance main and conrod bearings - Catcams camshafts - solid cam followers - custom ITB - custom airbox - mishimoto radiator - BC Racing BR-series coilover - DIY microsquirt ECU - Rota RKR 8x15" 10mm offset rims
This 10th-anniversary NB got in our workshop because on our last trackday in Anneau Du Rhin the timing belt got destroyed by some dirt of the track.
We supposed the valves also got broken because of other camshafts and higher compression, but luckily nothing else got broken.
It is a 1.8L bored to 2.0L with an ITB and very aggressive camshafts. On the dyno it produces 230 natural aspirated horsepower at 7800rpm. Because of that power and a shorter final drive in combination with a 6-speed gearbox and a shortshifter it is really much fun to drive. :D
Specs: - 1.8L BP bored to 2.0L with 85.5mm pistons - Jenvey ITB - Mishimoto X-Line radiator for Honda Civic - Reverie RH carbon airbox with custom ram-air hose - König K 5000 seats - OZ Ultraleggera 15 inch
This is a really nice sleeper setup. A 1.8L NA with a GT3071R turbocharger producing more than 350hp. The owner doesn't want a rollover bar because he wants to keep the sleeper look.
Specs: - 1.8L BP bored for 84.5mm Wiseco pistons - K1 conrods - ACL main- and rod bearings - Boundary stage 2 oilpump - ARP head stud kit - Garret GT3071R turbocharger - ATI Superdamper - SPS oil cooling kit - Mishimoto radiator - Skid Nation reroute kit - 6-speed gearbox - MiataRoadster short shifter - StopTech BBK 280mm - Rota Strike 8x15 20mm offset with Nankang AR-1 - CanChecked Display universal 2.8"
This is a supercharged NC from a good friend of the company. The car got a Rotrex C30/94 on its 2.0L installed producing 303hp and 314Nm. Also the car got a nice look with it shiny rims and low coilover setup.
this is our second MX-5 ND. It is wrapped in british racing green and has some cool stuff installed. It is also our first car with a 200hp package with a full exhaust system including race header and software tuning.
It has also following parts installed: - SPS circuit coilover - StopTech 280mm 4-pistons Big Brake Kit - Rays TE37 rims 8x16 25mm offset with Toyo R888 205/50 R16 tires - Friedrich Motorsport exhaust system - BBR GTi race header - Recaro Pole Position seats - CAE short shifter
3 weeks ago we took part at the German TimeAttack Finals and the European TimeAttack at the Nürburgring. Our race cars performed well, but our red ND just got a little accident. Nevertheless we celebrated many victories in different classes. It was a great season ending!
Long time nothing new here. So there You get a cool customer project. ;)
This 1.6L Miata import got a turbo conversion and has still its air conditioning installed and running. The engine got forged parts and the turbo is an upgraded TD04 turbocharger. Now the engine produces 281hp at the flywheel and 362Nm/267lbft torque.
The specs: - 1.6L B6 engine bored to 79mm - JE pistons 79mm - Cometic head gasket 79mm - Molnar Technologies conrods - ACL main bearings - King conrod bearings - Upgrade TD04 turbocharger - SPS 700ccm fuel injectors - SPS engine oil cooling kit - Competition Clutch Stage 3 - BC Racing BR-series coilover - Fender Flares - Japan Racing JR19 8Jx15 0mm offset with 20mm spacers front and 25mm spacers rear - Nankang NS-2R 195/50 R15 tires
Here we have one of a rarer conversion, a rotrex C15-60 supercharger. The 1.8L BP engine produces 200 hp with 242 Nm/178 lbft torque. It also has a Stoptech Big Brake Kit, some 15" Rota Grid wheels with Federal 595 RS-R tires in 205/50 ZR15, a SPS "Extreme" rollbar, a race header, a mishimoto radiator and our coilover setup.
This NC is getting a Borg Warner EFR7163 turbocharger on a forged engine running with 1.3 bar boost tuned with a MS3. It will produce around 400hp at the flywheel with 455Nm/336lbft torque. It also gets a full roll cage, fender flares, gearbox oil cooling system and differential oil cooling system.
the first post in 2020, this time something special.
We also restore complete cars. The customer made the decision to restore his car completely from zero to the top. It gets a new painting, new seals, new gaskets, new rubbers, a new windshield, a rollbar, Lotus Elise seats, a turboconversion (Borg Warner EFR 6758), a SPS coilover setup, and some nice wheels and tires.
We are filming the whole process and creating a time lapse video.
Some days ago we had a really nice looking ND here. We mounted Rota Kyusha 9x17" with 20mm offset on Hankook Ventus V12 215/40 ZR17. The suspension is our SPS "Super Low" coilover setup. The last step was mounting an ATH exhaust.
Here we have a new ND completely customized and wrapped in british racing green. The customer bought the new car from our Mazda dealer partner and we customized it.
Specs: 2020 MX-5 ND 184hp SPS street coilover setup Rays TE37 8x16" 25mm offset on 205/50 R15 Federal 595 RS-R Stoptech Big Brake Kit Recaro Pole Position Customized steering wheel Full exhaust with racing header and HJS 200 cells catalytic converter wrapped in british racing green
And again a really nice ND. This time we installed BBR GTi camshafts with a full exhaust system and tuned the ECU on the dyno. Now car the has 200hp at the flywheel instead of 160hp. The car also got some nice 17" Rotas, our SPS street coilover setup and Recaro pole position in full leather.
Hi, i will look for the dyno sheet. Maximum torque definitely increased.
This Turbo NA is a more powerful version. A 1.8L BP with forged internals, a Garrett GT3071R turbocharger producing 320hp at the flywheel with 1.2 bar boost.
Some more specs: Competition Clutch Stage 4 K-Sport coilover setup StopTech Big Brake Kit CAE short shifter on a 6-speed gearbox Reroute Kit Recaro Profi SPG seats sparco seat harness Nardi steering wheel Rota Grids in 8x15 with 25mm offset full 3" custom exhaust
We sell our TD04-Turbokit for the MX-5/Miata NA, NB and NBFL for just 3499€. On the stock 1.6L You get 220hp at the flywheel, on the stock 1.8L You get 250hp at the flywheel.
The kit contains: Kraken cast iron manifold Two-piece downpipe (first part made of cast iron, second part made of stainless steel) Turbocharger incl. Matching connection accessories Steelflex oil feed pipe water pipe High temperature oil return Giselwerks Hardpipe boost pressure piping efficient intercooler Open air filter SPS Motorsport 700CC Injectors (calibrated and tested) Engine control unit with matching basemap mounting material (incl. spark plugs BKR7EIX and modified washer fluid reservoir)
This MX-5 ND G184 gets a full engine swap to a 3.7L V6 LFX Camaro engine with transmission. And we use the car to develop a safety rollbar for the MX-5 ND, also to attache 4-point-harnesses.
here we have e really clean an nice looking NA with a Borg Warner EFR6258 turbo conversion on a stock 1.8L BP making 250hp. Also a very cool detail, the 7x14" Enkei RPF1 with 185/60 R14 Nankang NS-2R.
Specs: - 1.8L BP with EFR6258 - ME221 ECU - 3" exhaust system - Enkei RPF1 7x14" 28mm offset with Nankang NS-2R 185/60 R14. - Xtreme Clutch Stage 1 - BC Racing BR Series coilover setup - Mishimoto performance radiator - Sparco Sanremo steering wheel
This is a really nice equipped MX-5 NC 2.0L. The car got some Recaro Pole Position mounted on our new developed seat brackets in combination with our new roll bar for the MX-5 NC and a 4-point harness. The car also got our SPS coilover setup, H&R anti-roll-bars, 17" OZ Ultraleggeras with Nankang NS-2R, a CarbonMiata Ducktail and a CAE Ultra Shifter.
the last post was a few weeks ago. Now I have something new for You.
As You may know not only our customers drive MX-5s/Miatas, also some of our employees have them.
This is the car from our professional for all body work. It got a full Carbonmiata widebody kit which he installed by himself. The car also has a TD04 turbo conversion on its 1.8L BP making 250hp at the flywheel. To get the wheels (10,5x15 -13mm offset) fitted under the fenders he also installed camber arms on the rear axle together with our own SPS Super Low coilover setup. In the interior he installed a pair of Bride Low Maxx seats.
Tomorrow we have Black Friday and we have several new products in our shop. All of them will have a 12% discount on this day.
Our new turboconversions, ITB conversions, Duratec conversions, etc. and also many other products come with a TÜV certificate, so maybe there is something interesting for You.
If You have questions, just write here or write me an email on guido.sikora@sps-motorsport.com